KINTO ACTIVE TUMBLER Lid 600ml / 800ml
- Description
- Specs
- Method
-
You've been trying to get in some exercise at home before you start your work day but your kids won't leave your stuff alone and now the lid for your ACTIVE TUMBLER is missing. Don't fret, this replacement lid (or spare if you want to get ahead of the game!) will keep your ACTIVE TUMBLER in the bottle rotation.
-
- Polypropylene, Silicone, and Thermoplastic Elastomer Lid
- Thermoplastic Elastomer Spout
- Upper temperature tolerance: 100℃/212℉
- Keep drinks cold (6℃/43℉) for 6hours
- BPA Free
-
For maximum insulation efficiency, pre-cool the tumbler prior to use by filling in a bit of cold water for 1-2 mins
This is a tumbler for cold drinks. Do not use in a microwave. Do not use in a dishwasher. Do not place near open flames. Do not put in boiling water. Do not drop or subject the product to strong impact as it may cause breakage or leakage. Be careful with infants as their mischief may cause accidental ingestion or injury. Do not use for hot drinks as it may cause scalding or burns. Do not use with dry ice or carbonated beverage as it may expand and cause breakage. Be careful not to overfill as beverages may overflow when closing. Close the lid tightly to prevent spills or leakage when carrying. Please attach silicone rings so that the right side is up. Do not drink while walking as it may cause an injury in case of a fall. Keep the product upright to prevent accidental spills or leakage. Do not shake or apply strong vibration to the tumbler, as it may cause the leakage from the tip of the spout due to changes in internal pressure. Do not leave the product under high temperature such as in a car. Do not use with drinks that spoil easily, such as milk. Do not leave the product with drinks inside for a long time as it may spoil or cause rust on the tumbler. Immediately wash and dry well after use, then store it away from other metals to prevent rust. Do not leave it soaking as it may rust or break. Wash with care. Do not use abrasive cleansers or steel wool. Do not remove the spout forcibly. Do not use chlorine bleach as it may cause rust. When rust spots are found inside the tumbler, add warm water and citric acid in ratio of 10:1, wash with soft sponge after leaving it for 2-3 hours, and rinse well.
- Description
- Specs
- Method
-
You've been trying to get in some exercise at home before you start your work day but your kids won't leave your stuff alone and now the lid for your ACTIVE TUMBLER is missing. Don't fret, this replacement lid (or spare if you want to get ahead of the game!) will keep your ACTIVE TUMBLER in the bottle rotation.
-
- Polypropylene, Silicone, and Thermoplastic Elastomer Lid
- Thermoplastic Elastomer Spout
- Upper temperature tolerance: 100℃/212℉
- Keep drinks cold (6℃/43℉) for 6hours
- BPA Free
-
For maximum insulation efficiency, pre-cool the tumbler prior to use by filling in a bit of cold water for 1-2 mins
This is a tumbler for cold drinks. Do not use in a microwave. Do not use in a dishwasher. Do not place near open flames. Do not put in boiling water. Do not drop or subject the product to strong impact as it may cause breakage or leakage. Be careful with infants as their mischief may cause accidental ingestion or injury. Do not use for hot drinks as it may cause scalding or burns. Do not use with dry ice or carbonated beverage as it may expand and cause breakage. Be careful not to overfill as beverages may overflow when closing. Close the lid tightly to prevent spills or leakage when carrying. Please attach silicone rings so that the right side is up. Do not drink while walking as it may cause an injury in case of a fall. Keep the product upright to prevent accidental spills or leakage. Do not shake or apply strong vibration to the tumbler, as it may cause the leakage from the tip of the spout due to changes in internal pressure. Do not leave the product under high temperature such as in a car. Do not use with drinks that spoil easily, such as milk. Do not leave the product with drinks inside for a long time as it may spoil or cause rust on the tumbler. Immediately wash and dry well after use, then store it away from other metals to prevent rust. Do not leave it soaking as it may rust or break. Wash with care. Do not use abrasive cleansers or steel wool. Do not remove the spout forcibly. Do not use chlorine bleach as it may cause rust. When rust spots are found inside the tumbler, add warm water and citric acid in ratio of 10:1, wash with soft sponge after leaving it for 2-3 hours, and rinse well.
Non-Dairy Milks and Syrups
KINTO ACTIVE TUMBLER Lid 600ml / 800ml
- Description
- Specs
- Method
-
You've been trying to get in some exercise at home before you start your work day but your kids won't leave your stuff alone and now the lid for your ACTIVE TUMBLER is missing. Don't fret, this replacement lid (or spare if you want to get ahead of the game!) will keep your ACTIVE TUMBLER in the bottle rotation.
-
- Polypropylene, Silicone, and Thermoplastic Elastomer Lid
- Thermoplastic Elastomer Spout
- Upper temperature tolerance: 100℃/212℉
- Keep drinks cold (6℃/43℉) for 6hours
- BPA Free
-
For maximum insulation efficiency, pre-cool the tumbler prior to use by filling in a bit of cold water for 1-2 mins
This is a tumbler for cold drinks. Do not use in a microwave. Do not use in a dishwasher. Do not place near open flames. Do not put in boiling water. Do not drop or subject the product to strong impact as it may cause breakage or leakage. Be careful with infants as their mischief may cause accidental ingestion or injury. Do not use for hot drinks as it may cause scalding or burns. Do not use with dry ice or carbonated beverage as it may expand and cause breakage. Be careful not to overfill as beverages may overflow when closing. Close the lid tightly to prevent spills or leakage when carrying. Please attach silicone rings so that the right side is up. Do not drink while walking as it may cause an injury in case of a fall. Keep the product upright to prevent accidental spills or leakage. Do not shake or apply strong vibration to the tumbler, as it may cause the leakage from the tip of the spout due to changes in internal pressure. Do not leave the product under high temperature such as in a car. Do not use with drinks that spoil easily, such as milk. Do not leave the product with drinks inside for a long time as it may spoil or cause rust on the tumbler. Immediately wash and dry well after use, then store it away from other metals to prevent rust. Do not leave it soaking as it may rust or break. Wash with care. Do not use abrasive cleansers or steel wool. Do not remove the spout forcibly. Do not use chlorine bleach as it may cause rust. When rust spots are found inside the tumbler, add warm water and citric acid in ratio of 10:1, wash with soft sponge after leaving it for 2-3 hours, and rinse well.
Adding product to your cart
- Description
- Specs
- Method
-
You've been trying to get in some exercise at home before you start your work day but your kids won't leave your stuff alone and now the lid for your ACTIVE TUMBLER is missing. Don't fret, this replacement lid (or spare if you want to get ahead of the game!) will keep your ACTIVE TUMBLER in the bottle rotation.
-
- Polypropylene, Silicone, and Thermoplastic Elastomer Lid
- Thermoplastic Elastomer Spout
- Upper temperature tolerance: 100℃/212℉
- Keep drinks cold (6℃/43℉) for 6hours
- BPA Free
-
For maximum insulation efficiency, pre-cool the tumbler prior to use by filling in a bit of cold water for 1-2 mins
This is a tumbler for cold drinks. Do not use in a microwave. Do not use in a dishwasher. Do not place near open flames. Do not put in boiling water. Do not drop or subject the product to strong impact as it may cause breakage or leakage. Be careful with infants as their mischief may cause accidental ingestion or injury. Do not use for hot drinks as it may cause scalding or burns. Do not use with dry ice or carbonated beverage as it may expand and cause breakage. Be careful not to overfill as beverages may overflow when closing. Close the lid tightly to prevent spills or leakage when carrying. Please attach silicone rings so that the right side is up. Do not drink while walking as it may cause an injury in case of a fall. Keep the product upright to prevent accidental spills or leakage. Do not shake or apply strong vibration to the tumbler, as it may cause the leakage from the tip of the spout due to changes in internal pressure. Do not leave the product under high temperature such as in a car. Do not use with drinks that spoil easily, such as milk. Do not leave the product with drinks inside for a long time as it may spoil or cause rust on the tumbler. Immediately wash and dry well after use, then store it away from other metals to prevent rust. Do not leave it soaking as it may rust or break. Wash with care. Do not use abrasive cleansers or steel wool. Do not remove the spout forcibly. Do not use chlorine bleach as it may cause rust. When rust spots are found inside the tumbler, add warm water and citric acid in ratio of 10:1, wash with soft sponge after leaving it for 2-3 hours, and rinse well.
- Description
- Specs
- Method
-
You've been trying to get in some exercise at home before you start your work day but your kids won't leave your stuff alone and now the lid for your ACTIVE TUMBLER is missing. Don't fret, this replacement lid (or spare if you want to get ahead of the game!) will keep your ACTIVE TUMBLER in the bottle rotation.
-
- Polypropylene, Silicone, and Thermoplastic Elastomer Lid
- Thermoplastic Elastomer Spout
- Upper temperature tolerance: 100℃/212℉
- Keep drinks cold (6℃/43℉) for 6hours
- BPA Free
-
For maximum insulation efficiency, pre-cool the tumbler prior to use by filling in a bit of cold water for 1-2 mins
This is a tumbler for cold drinks. Do not use in a microwave. Do not use in a dishwasher. Do not place near open flames. Do not put in boiling water. Do not drop or subject the product to strong impact as it may cause breakage or leakage. Be careful with infants as their mischief may cause accidental ingestion or injury. Do not use for hot drinks as it may cause scalding or burns. Do not use with dry ice or carbonated beverage as it may expand and cause breakage. Be careful not to overfill as beverages may overflow when closing. Close the lid tightly to prevent spills or leakage when carrying. Please attach silicone rings so that the right side is up. Do not drink while walking as it may cause an injury in case of a fall. Keep the product upright to prevent accidental spills or leakage. Do not shake or apply strong vibration to the tumbler, as it may cause the leakage from the tip of the spout due to changes in internal pressure. Do not leave the product under high temperature such as in a car. Do not use with drinks that spoil easily, such as milk. Do not leave the product with drinks inside for a long time as it may spoil or cause rust on the tumbler. Immediately wash and dry well after use, then store it away from other metals to prevent rust. Do not leave it soaking as it may rust or break. Wash with care. Do not use abrasive cleansers or steel wool. Do not remove the spout forcibly. Do not use chlorine bleach as it may cause rust. When rust spots are found inside the tumbler, add warm water and citric acid in ratio of 10:1, wash with soft sponge after leaving it for 2-3 hours, and rinse well.
Non-Dairy Milks and Syrups
Related Products
You probably also want
Reviews
Awesome replacement for this tumbler, great price too
Perfect replacement for my lid that chipped. Great price
I dropped my kinto tumbler on a concrete floor and it survived, but the lid did not. Was happy I could replace just the lid at a decent price. Got it quickly and in a fun colour!
Quick delivery! Hassle free and I’m happy to have a new lid since my children broke my original one.
Standard Shipping to Canadian Provinces, including pallet shipping. We subsidize express shipping.
We support and warranty every product we sell, giving you the confidence to do the same for your customers.
We offer the best service in the specialty coffee gear industry, so you never have to worry.
Want us to come to you in person? We have relationship teams in Toronto, Montreal and Calgary.