Minimum order $250 for wholesale pricing

Volume Discounts

For wholesale customers who wish to increase their margin and reduce their costs, we offer a volume discount of 10% on orders over $1000 in value (before shipping and taxes)

This discount applies to your entire order (excluding shipping and taxes), with some exceptions. The following exceptions are in place because of tight margins, reducing our ability to offer larger discounts.

We strive to keep our prices as low as possible, and on a few of products it is impossible to offer further discounts on the wholesale price. Rather than increasing the wholesale price for our smaller customers, we prefer to keep pricing accessible to everyone. In essence, the wholesale price is equivalent to a 10% discount, but is available to everyone. We have reduced the prices on some wholesale products to reflect this.

Exceptions to volume discounts:

Coffee
Tea
Electric Brewers
Electric Grinders
Nut Milk Makers
Parts and replacements
Atago
Bentwood
Breville
Brood
ceado
DF Grinders
Duomo
Fellow Ode
Fiorenzato
Frank de Paula
Getchu Some Gear Canada
Kaffelogic
LUCCA
Morning
Oatly
Pacific Foods
Peak Water
Ratio
Technivorm
VAC Coffee
VARIA VS3 Grinders
Weber Workshops

Once your order reaches $1000 you will see what your discount is on each item at checkout. If no discount is listed, it means it is excluded from volume discounts.

Effective February 1, 2024, our 15% discount tier was discontinued and free shipping extended. Please click here for more information.

Free standard shipping to Canadian provinces

Free Shipping

Free Shipping Extended - INDEFINITELY!
We have received exceptional feedback on our free shipping promo, and are thrilled to announce that FREE STANDARD SHIPPING on ALL wholesale orders headed to any Canadian province* will be a permanent aspect of our service!

*Where We Can Ship For Free:
This offer is good for standard delivery to all Canadian provinces, not including P.O. boxes. Not valid for shipping to the Territories.

Fast-Track it:
Standard shipping is covered, but what if you want your order faster? You can also upgrade to express shipping at a discounted rate! Any order smaller than a pallet can be sent express. All you have to do is select the shipping option you want at checkout!

FLAIR 58 Espresso Maker (120V)

SKU: 860006241254
You must be logged in with an approved wholesale account to view pricing.
Spend over $1000 on your order and get this item for 10% off

Non-Dairy Milks and Syrups

FLAIR 58 Espresso Maker (120V)

SKU: 860006241254
You must be logged in with an approved wholesale account to view pricing.
Spend over $1000 on your order and get this item for 10% off
Fast Free Shipping in Canada
Warranty and Support on Everything We Sell
You must be logged in with an approved wholesale account to view pricing.
  • Description
  • Specs
  • Method
  • THE GOLD STANDARD IN MANUAL ESPRESSO!

    Unlock the true potential of your extraction with the Flair 58. A fully-manual, professional grade, lever espresso press.

    The Flair 58 features Flair's first industry standard 58mm portafilter as well as a more robust frame and lever for ease of extractions at higher pressures. The 58 also includes a Preheat Temperature Controller. Just set your brew head to one of three heat settings to ensure proper preheat and thermal control for every shot. The 58 utilizes stainless steel components for a plastic-free brew path, married to a durable, die-cast aluminum frame to withstand years of extractions. This premium build is coupled with elegant finishes, such as chrome plating and deluxe wooden accents.

    Please Note: All of our current units now include the new Valve Plunger design, Puck Screen & Low-Flow Portafilter Basket.

    Watch the videos in the playlist below below to learn more about The Flair 58 and don't forget to check out our YouTube channel for more videos about coffee and coffee products!

    • COLOUR: Black
    • SIZE: 508 x 355.6 x 152.4mm / 20 × 14 × 6in
    • WEIGHT 3.63kg / 8lb
    • BREW HEAD: Flair 58
    • RESEVOIR CAPACITY: 90ml / 3.04fl
    • PORTAFILTER DIAMETER: 58mm / 2.28in
    • MAX OUTPUT: 55ml / 1.86fl
    • IN THE BOX:
      • Flair 58 Base
      • Flair 58 Lever Assembly
      • Flair 58 Brew Head with Valve Plunger
      • Flair 58 Puck Screen
      • Flair 58 Pressure Gauge with Stainless Steel Stem
      • Flair 58mm Portafilter and 16-22 gram basket
      • Flair 58 Preheat Controller (PCB Controller, Power Supply Box, Wall Outlet)
      • Flair 58 mm Tamper
      • Flair 58 Preheat Cap
      • Flair 58 Drip Tray
      • Flair 58 Quick Start Guide
  • FLAIR 58 Quick Start Guide
    FLAIR 58 Preheat System Safety Guide

flare flair flaire leverpresso cafelat robot Elektra Micro Casa La Pavoni Europiccola ROK Presso

Non-Dairy Milks and Syrups

Reviews

Customer Reviews

Based on 14 reviews
93%
(13)
7%
(1)
0%
(0)
0%
(0)
0%
(0)
J
John S. (Ancaster, CA)
Great Espresso Machine

I'd been making pourover coffee with an Origami and Aeropress for about 2 years, but wanted to move into the world of espresso.

The TL:DR is that this machine is great. Really solid build quality, easy to use and clean, and very cost-effective for the quality of espresso shots you can produce. I highly recommend it, especially since all Flair 58s since around March 2023 come with nice quality of life upgrades included.

Onto the more detailed review:
The flavours this machine make are amazing. It does take some time to dial in your shots with a decent quality grinder, but depending on the coffee's origin you can do it much more quickly with each coffee bag. For example with a JX-Pro, Ethiopian coffees are around a 1-4-0 for me. I start around 1-2-0 for most other origins and move from there.

The build quality of this machine is really solid. I usually don't like buying non-chrome/bare stainless items like this, but after two months of almost daily use, there are no scratches or anything.

The portafilter that comes with the machine is perfect for me. I usually don't like high doses of espresso, so I keep it at ~15g in with 36g out and it tastes great every time. If you want higher doses past ~18g you will need to buy a bigger portafilter basket. The basket is also the low-flow basket so it's good for beginners like me, but if you know what you're doing the high-flow/regular basket may be what you want.

The electronics to heat the machine are a must-have in my opinion. It is a bit of wiring to get used to but not a deal-breaker. It takes about 8 minutes to fully heat at the highest heat setting, but by the time you get your water ready after that it will be more than enough time to pull a shot. There is silicone/rubber around the valve so you don't burn yourself if you touch it which is good.

The lever is really nice when pulling a shot. It's the most ergonomic of the Flair lineup from what I saw, which is a big plus if you want to use this as a daily machine for years to come.

The only "problem" I've had was that the piece that attaches the pressure gauge to the plunger inside the valve sometimes comes loose, but the solution is simply to rotate the plunger once you get that piece rested inside so it doesn't easily come loose. It will turn around again and possible loosen after a few weeks, but it's not a big deal.

Other than that, you do need a scale that fits inside the bottom frame like the Timemore Nano or the Acaia Lunar, but unless you want bluetooth connectivity and are really nerdy about pressure profiles and whatnot, the Timemore Nano will be good enough. It still has a mode to see the flow rate of the coffee while you're pulling a shot which is really all you need when pressure profiling anyways (in my opinion).

I
Ian W. (Moncton, CA)
Nice workflow, excellent results

I moved from a Breville Barista Express to the Flair 58 since it was a cost effective way to add pressure profiling. I like to pull a lot of lighter roasted coffees, adding control over this variable helps a lot. The ability to do long pre-infusions (e.g. slayer shots) is a great feature to have. That said, I think machine like this really makes it important for people to be a student of coffee, learn the nuances of the chemistry. This will be important to get full potential out of the machine. A quality grinder is is very important (I use a Commandante C40).

The build quality is very solid, the workflow is easier than expect. Very easy device to keep clean. Only bit of caution - making sure you have scales that will fit within the machine.

G
Gary G. (Sydney, CA)

It is my first real espresso machine and I am still getting used to it, adjusting my grinds and playing with it. It is fantastic and I only just started.
Love it.

C
Conrad (Red Deer, CA)
Perfect

It's my first machine so I have no comparison. But I love it. Easy to use, and clean. Looks great. Makes an amazing espresso

P
Phil (Calgary, CA)
Excellent and easier than expected

I started with the Neo after getting frustrated with expensive repairs on a mediocre machine. I liked it so much but the workflow wasn't amazing. Enter the Flair 58. The heating element is invaluable and I couldn't imagine living without it.
Within a few shots, I had my grind dialed in and was making excellent lattes. My only complaint is the drip dray doesn't attach to the base. Minor issue that I am sure someone with a 3D printer could solve.
Is it worth it? If you live in a tax bracket that can afford it, then yes. The cost was a huge stretch for me but if it lasts a lifetime, then yes it is.