Minimum order $250 for wholesale pricing

Volume Discounts

For wholesale customers who wish to increase their margin and reduce their costs, we offer a volume discount of 10% on orders over $1000 in value (before shipping and taxes)

This discount applies to your entire order (excluding shipping and taxes), with some exceptions. The following exceptions are in place because of tight margins, reducing our ability to offer larger discounts.

We strive to keep our prices as low as possible, and on a few of products it is impossible to offer further discounts on the wholesale price. Rather than increasing the wholesale price for our smaller customers, we prefer to keep pricing accessible to everyone. In essence, the wholesale price is equivalent to a 10% discount, but is available to everyone. We have reduced the prices on some wholesale products to reflect this.

Exceptions to volume discounts:

Coffee
Tea
Syrups
Donations
Alternative Milks
Bean Dosers
Electric Brewers
Electric Grinders
Nut Milk Makers
Parts and replacements
Atago
Bentwood
Breville
Brood
ceado
DF Grinders
Duomo
Fellow Ode
Fiorenzato
Getchu Some Gear Canada
Kaffelogic
LUCCA
Morning
Oatly
Pacific Foods
Peak Water
Ratio
Technivorm
Weber Workshops

Once your order reaches $1000 you will see what your discount is on each item at checkout. If no discount is listed, it means it is excluded from volume discounts.

Effective February 1, 2024, our 15% discount tier was discontinued and free shipping extended. Please click here for more information.

Free standard shipping to Canadian provinces

Free Shipping

Free Shipping Extended - INDEFINITELY!
We have received exceptional feedback on our free shipping promo, and are thrilled to announce that FREE STANDARD SHIPPING on ALL wholesale orders headed to any Canadian province* will be a permanent aspect of our service!

*Where We Can Ship For Free:
This offer is good for standard delivery to all Canadian provinces, not including P.O. boxes. Not valid for shipping to the Territories.

Fast-Track it:
Standard shipping is covered, but what if you want your order faster? You can also upgrade to express shipping at a discounted rate! Any order smaller than a pallet can be sent express. All you have to do is select the shipping option you want at checkout!

SUBMINIMAL NanoFoamer

SKU: NF-02-BL
You must be logged in with an approved wholesale account to view pricing.
Spend over $1000 on your order and get this item for 10% off

Non-Dairy Milks and Syrups

SUBMINIMAL NanoFoamer

SKU: NF-02-BL
You must be logged in with an approved wholesale account to view pricing.
Spend over $1000 on your order and get this item for 10% off
Fast Free Shipping in Canada
Warranty and Support on Everything We Sell
You must be logged in with an approved wholesale account to view pricing.
  • Description
  • Specs
  • Method
  • Documentation
  • MAKE MICROFOAM AT HOME

    While aerolatte-style electric whisks are great for mixing liquids, it would be difficult to say that they can, in any way, produce smooth luscious microfoam - perfect for pouring latte art. Subminimal, however, has taken the handheld whisk design, re-engineered it, and has created a stunning, little tool that allows you to create actual, high-quality microfoam in seconds. We were skeptical too, but it actually does an amazing job. So what does this mean..? Whether the steam pressure on your espresso machine is not up to the job, you use mocha pots, you're a fan of pod coffee, or you are out camping, you can create delicious textured milk that you'd expect to get from your favourite coffee shop.

    The NanoFoamer (V2) has the following improvements on the V1

    • Click-On NanoScreens: The new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
    • Replaceable Impeller: Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
    • Upgraded Impeller Material: The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
    • Improved Waterproofing: Overall better seals on the closures and shaft.
    • Better Motor: The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
    • Stainless Steel Housing: The motor housing is now made of real brushed stainless steel for a far more premium experience.
    • More Stable Shaft: Tighter tolerances deep inside the motor translate directly onto the shaft's stability. Spinning dead center is key to spinning fast and reducing vibrations.
    • On/Off Digital Switch: The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
    • Safety PCB: Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
    • New Battery Housing: The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
    • Reduced Vibrations: The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
    • All New Engineering: Better internal engineering with sonic welded components instead of snap-fitted parts.

    For ultimate, rechargable performance, the NanoFoamer (Lithium) has the features of the V2 plus the following improvements

    • Dual-speed: This NanoFoamer is so powerful, it had to be slowed down, it was built with a multi-touch switch for selecting one of two speeds.
    • Powerful Li-ion battery: A powerful 3.7V 1200Mah lithium-ion battery gives this product superpowers up to 14k RPM and very high torque.
    • Battery Level Indicator: Four LEDs quickly show you when you should consider recharging.
    • USB Type C: USB-C is the connector of choice for all the best electronics on the market today, so you can recharge your NanoFoamer with any USB charger you already own.

    • Available in V2 or Lithium models
    • USB-C cable included with Lithium model
    • Two screens included
    • Waterproof
    • 5 mm diameter stainless steel shaft
  • Choose: Select a NanoScreen to suit your preferred microfoam type: Superfine, fine, or ordinary foam.

    Churn: Churn your warm milk (55°C is ideal) for about 15 seconds. Start in the middle to incorporate air, then move to the side to continue churning and blending the foam.

    Pour: Pour your perfectly microfoamed milk over espresso. It should feel like pouring paint. Draw a heart, rosetta or something abstract!

    Subminimal NanoFoamer - Getting Started Guide

  • Subminimal Nanofoamer - Data Sheet

milk foamer aerolatte subliminal sub minimal subminimum minisub suboptimal whisk cappucino latte foam foamy coffee

Non-Dairy Milks and Syrups

Reviews

Customer Reviews

Based on 36 reviews
47%
(17)
28%
(10)
11%
(4)
11%
(4)
3%
(1)
D
Daniel B. (Edmonton, CA)
Lithium is really nice

I really like the lithium battery version. It lasts for several drinks without needing to be charged. Takes a bit of practice to get silky milk but it does work.

A
Alena R. (Peace River, CA)
perfect for my needs

It’s easy to use , and creates a nicely textured milk quickly.

The only downside is having to heat up the milk separately, but for this price point it beats buying an actual steamer!

Also very travel friendly if you are bringing a manual espresso machine anywhere.

M
May (Toronto, CA)
Good stuff

Lithium version is more convenient for me to charge. Definitely better than other frother out there. Sleek and looks great too.

K
Konami Miwa (Calgary, CA)
Handy tool

They are a handy tool for frothing milk.
It foam into a creamy deliciousness.
Highly recommend!

T
Troy R. (Oshawa, CA)
Such an amazing frother!

I wanted to buy a frother from Amazon but saw this while brought 8oz. Happy that I bought this and the lithium model after seeing the reviews here and on youtube. Defitnely should opt for the lithium if you will be using it often as on low battery the impeller wont be able create enough torque against the milk. Really easy and quick to pick up. Makes it super fun to make cold foam or make some quick latte art in a pinch!