Replace that leaky gasket in the group head of your espresso machine with this neutral and aroma-free silicone gasket. The soft consistency creates a better seal and makes installation even easier.

  • 8.0mm conical design and external grooves match standard group head gaskets
  • Heat resistant silicone
  • Forms tight seal without tightening the portafilter as much as a standard gasket
  • Fits all espresso machines with E61 group heads
  • 73mm x 57mm x 8.0mm Red Silicone Gasket
  • Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
  • Use the portafilter with the basket removed to install the gasket to avoid breakage

la spa la spez

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
t
tudor c. (Etobicoke, CA)
Fits my Gaggia well!

This silicone ring fits my Gaggia Classic perfectly and gives my portafilter a tight snug fit, love it!

D
Dean Linnell (Whistler, CA)
Does the Job

You can't go wrong in switching out your stock espresso machine gasket with a fresh silicone version. Much better lifespan and portafilter fit.

S
Sherri Fletcher (Bolton, CA)
Works Perfectly

Got this to replace our Rocket Giotto gasket as it was beginning to leak. It works perfectly, so happy with my pours again!

A
Alexandre Gaudreau (Laval, CA)
Don't buy a machine without getting this silicon at the same time, it's a MUST.

One would have to be a fool to skip out on this for just ~5$. This is night & day versus the stock horrible rubber gasket from Rocket. Not only the portafilter slides in better but this is the only way I've been able to reach the perfect 6'o clock position as otherwise it was always stuck at 7H which was fairly annoying too. It's gonna last much longer too so just trash the stock one asap to replace it with this silicon gasket.

J
Jean J. (Halifax, CA)
Little loose on the Lelit Bianca PL162T

If you have a Lelit Bianca PL162T you’ll find that the gasket is a bit looser than the original group head gasket. I may try the 8.5mm to see. It does have a good seal so no complaints.

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
t
tudor c. (Etobicoke, CA)
Fits my Gaggia well!

This silicone ring fits my Gaggia Classic perfectly and gives my portafilter a tight snug fit, love it!

D
Dean Linnell (Whistler, CA)
Does the Job

You can't go wrong in switching out your stock espresso machine gasket with a fresh silicone version. Much better lifespan and portafilter fit.

S
Sherri Fletcher (Bolton, CA)
Works Perfectly

Got this to replace our Rocket Giotto gasket as it was beginning to leak. It works perfectly, so happy with my pours again!

A
Alexandre Gaudreau (Laval, CA)
Don't buy a machine without getting this silicon at the same time, it's a MUST.

One would have to be a fool to skip out on this for just ~5$. This is night & day versus the stock horrible rubber gasket from Rocket. Not only the portafilter slides in better but this is the only way I've been able to reach the perfect 6'o clock position as otherwise it was always stuck at 7H which was fairly annoying too. It's gonna last much longer too so just trash the stock one asap to replace it with this silicon gasket.

J
Jean J. (Halifax, CA)
Little loose on the Lelit Bianca PL162T

If you have a Lelit Bianca PL162T you’ll find that the gasket is a bit looser than the original group head gasket. I may try the 8.5mm to see. It does have a good seal so no complaints.

x