- Description
- Specs
-
PRECISION-FILL YOUR PORTAFILTER
The Flair 58 funnel is an aluminum funnel that magnetically attaches to your Flair 58 portafilter. Never sliding off, always in the right place. Ensure your dose goes exactly where you want it to, right to your extraction.
flare flair flaire leverpresso cafelat robot Elektra Micro Casa La Pavoni Europiccola ROK Presso
For all of you home baristas rocking a Breville Dual Boiler, I can confirm that this funnel works like a hot damn with the stock portafilter (a KILLER combo is this funnel and the Nanotech 18g basket 💥). This combo sped up my workflow significantly.
As for the magnets, they work just fine…unless you want to incorporate some serious stump pulling magnetic strength in your espresso workflow 😝.
No grinds on the top edge of the portafilter either. Nice. And. Clean.
Not a fan of the big bold Flair branding on the side of the funnel, but whatever. That’s easily addressed by facing it behind, banishing it to the darkness of the wall behind it. Or a Sharpie…
Another instance of Eight Ounce to the rescue. Superhero status.
Like the others, I am not using this funnel on a flair 58, but on my Gaggia Classic Pro Portafilter. The fit is fine, but not flawless. It does, however, do exactly what I wanted it to.
Fits great on my Rancilio portafilter. The funnel sits on top of the PF (as opposed to partially inside the basket) which makes it perfect for WDT.
Fits the portafilter for my Breville Dual Boiler perfectly. The magnets keep it in place nicely with no part of it inside the portafilter getting in the way. Doesn't fit in the Breville Smart Grinder, but that's fine - I just put it on after grinding for WDT.
This will work just as good as any dosing funnel. My biggest complaint is it sits on the portafilter/basket kind of loosely and the magnets don't seem to be strong enough for my liking. If it did not have the magnets it would probably function just as well, but it is made of aluminum so it is lighter than a stainless steel dosing funnel, so perhaps the magnets do serve a bit of a function. I thought it may have been the portafilter/basket that didn't have enough metal to be magnetic, but I tested it with some other strong magnets I have and it sticks well. To put it another way, if you were to invert the portafilter upside down, the magnets cannot hold the weight of the funnel, I know this is not what the product was intended for, but it gives you an idea of the strength of the magnets. I find when I knock grinds down after WDT I need to make sure to hold the funnel when I tap it against my tamping mat, whereas with other magnetic funnels I have used, this could be done without holding the funnel.
You can tamp through this if you want as there is no inner ring that sits inside the basket.
For all of you home baristas rocking a Breville Dual Boiler, I can confirm that this funnel works like a hot damn with the stock portafilter (a KILLER combo is this funnel and the Nanotech 18g basket 💥). This combo sped up my workflow significantly.
As for the magnets, they work just fine…unless you want to incorporate some serious stump pulling magnetic strength in your espresso workflow 😝.
No grinds on the top edge of the portafilter either. Nice. And. Clean.
Not a fan of the big bold Flair branding on the side of the funnel, but whatever. That’s easily addressed by facing it behind, banishing it to the darkness of the wall behind it. Or a Sharpie…
Another instance of Eight Ounce to the rescue. Superhero status.
Like the others, I am not using this funnel on a flair 58, but on my Gaggia Classic Pro Portafilter. The fit is fine, but not flawless. It does, however, do exactly what I wanted it to.
Fits great on my Rancilio portafilter. The funnel sits on top of the PF (as opposed to partially inside the basket) which makes it perfect for WDT.
Fits the portafilter for my Breville Dual Boiler perfectly. The magnets keep it in place nicely with no part of it inside the portafilter getting in the way. Doesn't fit in the Breville Smart Grinder, but that's fine - I just put it on after grinding for WDT.
This will work just as good as any dosing funnel. My biggest complaint is it sits on the portafilter/basket kind of loosely and the magnets don't seem to be strong enough for my liking. If it did not have the magnets it would probably function just as well, but it is made of aluminum so it is lighter than a stainless steel dosing funnel, so perhaps the magnets do serve a bit of a function. I thought it may have been the portafilter/basket that didn't have enough metal to be magnetic, but I tested it with some other strong magnets I have and it sticks well. To put it another way, if you were to invert the portafilter upside down, the magnets cannot hold the weight of the funnel, I know this is not what the product was intended for, but it gives you an idea of the strength of the magnets. I find when I knock grinds down after WDT I need to make sure to hold the funnel when I tap it against my tamping mat, whereas with other magnetic funnels I have used, this could be done without holding the funnel.
You can tamp through this if you want as there is no inner ring that sits inside the basket.