• Description
  • Specs
  • Method
  • GET THE RIGHT TEMPERATURE

    Take control of your brew and improve repeatability of your tasty shots by placing these easy to use, easy to read temperature strips on your brew heads.

    The high heat Temperature Strip, has a range of 70 to 100°C / 158 to 212°F to ensure that your brew head is preheated prior to adding your brew water.

    Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip.

    • TEMPERATURE RANGE: 70 to 100°C / 158 to 212°F
    • TEMPERATURE ACCURACY: +/- 2°C / 3.6°F
    • ESTIMATED SHELF-LIFE OF ADHESIVE: 2 yrs, but will vary depending on application and use
  • Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip

    As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.

    • TAN window is above actual temperature reading
    • GREEN window is actual temperature reading
    • BLUE window is below actual temperature reading

flare flair flaire leverpresso cafelat robot Elektra Micro Casa La Pavoni Europiccola ROK Presso

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
J
John Davis (Brooklyn, US)
Works great, easy to read!

This is the best temperature strip I've found. Accurate (enough), the right temperature range for a grouphead on an espresso machine, and easy to read. Highly recommended.

A
A.L. (Edmonton, CA)
Interesting to have

For manual espresso machine like the flair, thermal management is always difficult. Having this give you some real time feedback, to an extend. It might be a little tricky to get on though for some model, if the space is not quite enough you could try to move the rubber grip on the chamber and put it on.

D
Dylan (Ottawa, CA)
Right size for Flair Pro 2

The sticker stuck firmly and was the right size.

P
Phil (Calgary, CA)
Works, but..

It works but I don't think this is necessary at all. Just my opinion.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
J
John Davis (Brooklyn, US)
Works great, easy to read!

This is the best temperature strip I've found. Accurate (enough), the right temperature range for a grouphead on an espresso machine, and easy to read. Highly recommended.

A
A.L. (Edmonton, CA)
Interesting to have

For manual espresso machine like the flair, thermal management is always difficult. Having this give you some real time feedback, to an extend. It might be a little tricky to get on though for some model, if the space is not quite enough you could try to move the rubber grip on the chamber and put it on.

D
Dylan (Ottawa, CA)
Right size for Flair Pro 2

The sticker stuck firmly and was the right size.

P
Phil (Calgary, CA)
Works, but..

It works but I don't think this is necessary at all. Just my opinion.